Ademco 4140XMPT2 Basic User Codes

97 total codes, (02 to 99), any code can be Master or Duress or Regular User Code

User Codes can be 4 or 6-digits (determined by Installer)

Code 02 is usually set as Master Code

View Authority 4 digit code + **, keypad will display Authority/Partition levels (Alpha keypads only)

All available partitions this code can use will be displayed

Tech_201000000150.gif This code is User 05

Access control group is 0 (none)

User is assigned to OFFICE partition

Authority level is 1 (Master Code)

G indicates User can globally arm all partitions

Display will exit User programming if no key is pressed within 10 seconds

Add New User 1. Master Code + 8

  1. Enter User Number (02 to 69) + new User Code

Tech_201000000144.gif This screen briefly appears

  1. Tech_201000000145.gif Enter Authority Level or * to exit

  1. = Master Code (Can change all codes)

  2. = Manager Code (Can change all but Master code)

  3. = User in Partition 1 (Standard User code)

  4. = User in Partition 2 (Standard User code, cannot bypass)

  5. = User in Partition 3 (Can disarm only if armed by same code)

  6. = Duress/Hostage Code

4. Tech_201000000230.gif NO = User Code only uses one partition

YES = User Code uses multiple partitions

5. Tech_201000000147.gif NO = User Code arms only partition it is assigned to

YES = User Code arms all partitions

6. Tech_201000000148.gif Other partitions this code uses? (If YES is entered in step 4)

This will display for every available partition

  1. Tech_201000000219.gif NO = Do not link User Code to Keyfob

YES = Link User Code to Keyfob

Tech_201000000231.gif Enter first Keyfob zone number (01 to 64)

  1. Tech_201000000145.gif This displays summary of User, press * to continue

This code is User 005

Access control group is 0 (none)

User is assigned to OFFICE partition

Authority level is 1 (Master Code)

G indicates User can globally arm all partitions

  1. Tech_201000000151.gif Display exits User programming, press * to exit or wait 10 seconds

Change Existing 1. Master Code + 8

User Code

2. Enter existing User (02 to 69) + new User Code

Tech_201000000144.gif This screen briefly appears

3. Tech_201000000146.gif NO = Change this User Code

YES = Create new user at next available User Location

(If YES see "ADD NEW USER" section)

4. Tech_201000000232.gif Display shows User Code changed

Tech_201000000233.gif Code not changed because it doesn't exist

Tech_201000000234.gif Code change aborted or existing Code has higher authority

than the User Code making the change

5. Tech_201000000151.gif Display exits User programming, press * to exit or wait 10 seconds

Delete User 1. Master Code + 8

Code 2. Enter existing User (02 to 69) + Master Code

Tech_201000000144.gif This screen briefly appears

3. Tech_201000000235.gif NO = Abort

YES = Delete User Code

4. Tech_201000000236.gif User Code deleted

Tech_201000000233.gif No User Code exists in that location

Tech_201000000237.gif Code change aborted or existing Code has higher authority

than the User Code used to delete

5. Tech_201000000151.gif Display exits User programming, press * to exit or wait 10 seconds

Program 1. Installer Code + 8 + (02 to 69) + New Master Code (Keypad should beep)

Master Code

2. Tech_201000000145.gif Enter Authority Level or * to exit

  1. = Master Code (Can change all codes)

  2. = Manager Code (Can change all but Master code)

  3. = User in Partition 1 (Standard User code)

  4. = User in Partition 2 (Standard User code, cannot bypass)

  5. = User in Partition 3 (Can disarm only if armed by same code)

  6. = Duress/Hostage Code

3. Tech_201000000238.gif NO = No Opening/Closing Reports to Central Station

YES = Send Opening/Closing Reports

4. Tech_201000000230.gif NO = User Code only uses one partition

YES = User Code uses multiple partitions

5. Tech_201000000147.gif Will User Code arm other partitions?

NO = User Code arms only partition it is assigned to

YES = User Code arms all partitions

6. Tech_201000000148.gif Other partitions this code uses? (If YES is entered in step 4)

This will display for every available partition

  1. Tech_201000000219.gif If Assigning User Code to Keyfob

NO = Do not link User Code to Keyfob

YES = Link User Code to Keyfob

Tech_201000000231.gif Enter first Keyfob zone number (01 to 64)

  1. Tech_201000000145.gif This displays summary of User, press * to continue

This code is User 05

Access control group is 0 (none)

User is assigned to OFFICE partition

Authority level is 1 (Master Code)

G indicates User can globally arm all partitions

  1. Tech_201000000151.gif Display exits User programming, press * to exit or wait 10 seconds