Ademco 4150 Basic Commands

Zones 6 Hardwired

Battery 12 volt rechargeable Gel-Cell inside main panel

AC Transformer is 16.5 volts, screwed into outlet somewhere in house

Wireless No

Downloadable No

Panic Buttons Police - Press both EMERG keys

Fire - Press both FIRE keys

Zone Status When pressed will allow LED's to show zone status (open/closed)

When released will allow LED's to show panel status (armed/bypass/trouble etc)

Arm AWAY User Code

Arm STAY # + 3 (STAY) + User Code

Instant Arm # + 3 (STAY) + User Code + # + 7 (INSTANT)

Quick-Arm Not available

Disarm User Code

Silence Alarm User Code

Bypass 1. # + 6 (BYPASS)

2. Enter Zone to bypass (1 to 6) (Zone light will turn on)

3. Press # to exit

Bypass will be removed by arming/disarming

Note: Fire zones cannot be bypassed

Alarm Memory Last alarms only shows until system disarmed twice

Sensor Test 1. # + 4

2. Siren will briefly sound if a sensor is activated

3. End test by pressing any key

Phone Test # + 5

Reset Smoke # + TEST RESET

(If this does NOT reset smoke detector set for service, smoke is bad)

Door Chimes # + 9 (CHIME)