Ademco 4160 Basic Commands

Zones 6 Hardwired

Battery 12 volt rechargeable Gel-Cell inside main panel

AC Transformer is 16.5 volts, screwed into outlet somewhere in house

Wireless No

Downloadable No

Panic Buttons Police - Press both POLICE keys

Fire - Press both FIRE keys

Medical - Press both EMERG keys

Arm AWAY User Code + 2 (AWAY)

Arm STAY User Code + 3 (STAY)

Instant Arm User Code + 3 (STAY) + 7 (INSTANT)

Quick-Arm Not available

Disarm User Code + 1 (OFF)

Silence Alarm User Code + 1 (OFF)

Bypass User Code + 6 (BYPASS) + Zone (1 to 6) (Display should show bypased zone)

Note: Fire zones cannot be bypassed

Force Bypass 1. Open Zone to bypass

2. Press User Code + 2 (AWAY) or 3 (STAY)

  1. Press 6 (BYPASS)

Alarm Memory Last alarms only shows until system disarmed twice

Sensor Test 1. User Code + 0 (TEST)

2. Siren will briefly sound if a sensor is activated

3. End test by User Code + 1 (OFF)

Sensor Test 1. User Code + 0 (TEST) (Siren sounds for 3 seconds, keypad beeps every 15 seconds)

2. Open sensors, siren will sound

3. End test with User Code + 1 (OFF)

Reset Smoke User Code + 1 (OFF) twice

(If this does NOT reset smoke detector set for service, smoke is bad)

Door Chimes User Code + 9 (CHIME)